In order to keep the residual and/or test water of a new spa from contaminating the water, please clean your spa as described below: 

• Fill your spa with tap water.
• Add 0.5 litres of Aqua Excellent Spacleaner to the spa’s water.
• Ensure all jets are opened and let the pumps run at maximum power for 15 minutes.
• Leave the water in the spa overnight.
• Repeat step 2.
• Drain the water and rinse the spa with clean tap water. Then also drain the rinsing water.
• Fill your spa with clean tap water and install a (new) clean filter.
• Ensure the pH value is between 7.2 and 7.4.
• Place the chlorine dispenser with chlorine tablet onto the filter and heat your spa up to the requested temperature (38°C).
• Start the Aqua Excellent All-In-One water treatment as specified in the respective instructions.
• Start at step b the night before the water is being exchanged (each three months).

Tip: check your spa water’s pH value each three weeks.

Aqua Excellent Spa cleaner
Spa Cleaner

• Add 0.5 litres of Aqua Excellent Spacleaner to the spa’s water the night before the water is being exchanged.
• Ensure all jets are opened and let the pumps run at maximum power for 15 minutes.
• Leave the water in the spa overnight.
• Repeat step 1.
• Drain the water and rinse the spa with clean tap water. Then also drain the rinsing water.
• Remove the filter and clean it using Aqua Excellent Filter Cleaner*.
• Fill your spa with clean tap water and install a (new) clean filter.
• Ensure the pH value is between 7.2 and 7.
• Place the chlorine dispenser with chlorine tablet onto the filter and heat your spa up to the requested temperature (38°C).
• Start the Aqua Excellent All-In-One water treatment as specified in the respective instructions.
• Start at step a the night before the water is being exchanged (each three months).

Tip: check your spa water’s pH value each three weeks.

Aqua Excellent Spa cleaner
Spa Cleaner
Aqua Excellent Filter cleaner
Filtercleaner

• Sprinkle two spoons full of Excellent Filter Cleaner over the filter.
• Place the filter into a bucket. • Fill the bucket with hot water.
• Let the filter soak in there for one to one and a half hours (turn the filter repeatedly).
• Rinse the filter using a jet of water and reinstall it in the spa

Questions - ask us

info@aqua-excellent.com

Helpdesk

+31 (0) 318 - 516 406